その他

結果 1 ~ 10/39
< 前のページ1234次のページ >
ページごとの結果:
説明
Hide all the surfaces within a part or assembly.
カテゴリ
提供者
会社
DD studio
ダウンロード
27
追加日
24 7, 2018
名前
説明
Macro that will launch the UPG Post-Processor Application from within SOLIDWORKS & includes Post Processor Source files for SOLIDWORKS CAM.
カテゴリ
提供者
会社
Dassauly Sytemes
ダウンロード
382
追加日
9 12, 2017
説明
CamWorks API Help File and also applies to SOLIDWORKS CAM STD & PRO 2018.
カテゴリ
提供者
会社
Dassauly Sytemes
ダウンロード
112
追加日
29 11, 2017
説明
This macro will mirror all the operations of a setup. After programming a part, draw a sketch line. Run the macro, and mirrored tool-paths will be created. The zip file also contains a bitmap image that can be used to create a macro icon in the SOLIDWORKS Graphical User Interface. To be used with SOLIDWORKS CAM Standard or Professional. To be used with SW2018 version or higher.
カテゴリ
提供者
会社
Dassauly Sytemes
ダウンロード
44
追加日
17 11, 2017
説明
We've been there. Working on an assembly and there are a ton of documents open bogging down Solidworks. In order to clear the clutter you have to close each document individually. Not any more. Just run this macro and every document except the active document will be closed.
カテゴリ
提供者
会社
Nuline Sensors
ダウンロード
289
追加日
29 8, 2017
説明
I'm constantly using the infinite length center lines in sketches and it's annoying to create them every sketch so I wrote this macro. Now I select the plane or face that I want to sketch on in my model and I press the hot key. A sketch is created with horizontal and vertical infinite length center lines.
カテゴリ
提供者
会社
Nuline Sensors
ダウンロード
293
追加日
15 8, 2017
説明
Macro to create a drawing from an assembly. The first sheet of the drawing will have the isometric view of the assembly in the bottom left corner and the BOM in the top left corner. A sheet will be created for each individual component that was selected in the form that pops up with the isometric view in the bottom left corner. User must update paths to their formats before the macro will work properly. Enjoy.
カテゴリ
提供者
会社
Nuline Sensors
ダウンロード
441
追加日
9 8, 2017
説明
Easily export DXFs/DWGs from faces of a part. Select single or multiple planar faces in a part and run the macro to automatically export. I assigned it to the hotkey "Ctrl + d". Now all I have to do is have the part open, select the face(s) I want to export and hit "Ctrl + d" and it saves it automatically. No more going through the DXF/DWG Output wizard. Exits cleanly for a variety of situations and error message pops up if it fails to export.
カテゴリ
提供者
会社
Nuline Sensors
ダウンロード
373
追加日
28 7, 2017
説明
Macro to export STEP in both parts and assemblies. Exits cleanly if no part open or drawing open. Can be easily modified for IGES, Parasolids, ect. Link to a hotkey for fast exports.
カテゴリ
提供者
会社
Nuline Sensors
ダウンロード
390
追加日
26 7, 2017
説明
Add this macro to Custom Check within the Design Checker and it will search and identify buried features.
カテゴリ
提供者
会社
Dassauly Sytemes
ダウンロード
58
追加日
22 4, 2017