48T Gear with 1.125 Bearing Bore & VersaKeys

ｻﾌﾟﾗｲﾔ:
VEX Robotics
ﾓﾃﾞﾙ名:
48T Gear with 1.125 Bearing Bore & VersaKeys
ｺﾝﾌｨｷﾞｭﾚｰｼｮﾝ名:
部品番号:
217-3338
数量:
ﾌｧｰｽﾄﾈｰﾑ(名):
ﾗｽﾄﾈｰﾑ(姓):
電子ﾒｰﾙ:
電話番号:
会社名:
住所:
市/区/町:
都道府県名:
国:
郵便番号:
ｺﾒﾝﾄ:
ｺﾋﾟｰを電子ﾒｰﾙで送信:
   
変更日時: 8月 12,2015  
評価: 
ﾀﾞｳﾝﾛｰﾄﾞ: 11
 
ｺﾒﾝﾄ: 
 
 

このﾓﾃﾞﾙのより優れたﾊﾞｰｼﾞｮﾝまたは修正ﾊﾞｰｼﾞｮﾝを持っていますか?
代替ﾊﾞｰｼﾞｮﾝを投稿   (ﾛｸﾞｲﾝが必要)
この 3D ﾓﾃﾞﾙをﾌﾞﾛｸﾞに埋め込む

 
不適切なｺﾝﾃﾝﾂを報告

仕様
ｻﾌﾟﾗｲﾔ ﾓﾃﾞﾙの説明: 217-3338
名前:48T Gear with 1.125 Bearing Bore & VersaKeys
説明:VEXpro offers an assortment of gear types, chosen to provide the greatest versatility of gearing options to users. Our sizes were specifically chosen to provide a wide spread of of ratio options useful for FRC designers. Larger size VEXpro gears are available so designers can accomplish their entire reduction in a single stage where otherwise they would have used more than one! All VEXpro gears are 20DP with 14.5 degree pressure angle, and have the same overall width -- this means it is easy to interchange VEXpro gears in your design to change a ratio without modifying the overall system; true versatility. 3/8" or 1/2" hex bores for use on hex shafts. 1.125" bearing bores for dead axle applications. Includes VersaKey pattern for perfect piloting. Made from 7075-T6 aluminum with a teflon infused ceramic coating.
    
  • 設定とﾀﾞｳﾝﾛｰﾄﾞ
  • 評価とｺﾒﾝﾄ (0)
  • ﾀｸﾞ (0)
  • 代替ﾊﾞｰｼﾞｮﾝ

 

指定されたｻｲｽﾞ設定ﾊﾟﾗﾒｰﾀｰに従って、3D または 2D ﾌｫｰﾏｯﾄでﾓﾃﾞﾙをﾀﾞｳﾝﾛｰﾄﾞします。
(ﾛｸﾞｲﾝが必要)
  この部品を最初に評価する  (ﾛｸﾞｲﾝが必要)

不適切なｺﾒﾝﾄを報告
   


このﾓﾃﾞﾙの別のﾊﾞｰｼﾞｮﾝを持っていますか? 代替ﾊﾞｰｼﾞｮﾝを投稿 (ﾛｸﾞｲﾝが必要)
VEX Robotics
VEX Robotics
1519 Interstate 30 West
Greenville, Texas, 75402
United States
電話番号: 19034530802
Fax:
電子ﾒｰﾙ:
Web ﾍﾟｰｼﾞ: http://www.vexrobotics.co...
このｻﾌﾟﾗｲﾔのすべての製品