500 ThunderHex Stock (3 feet)

ｻﾌﾟﾗｲﾔ:
VEX Robotics
ﾓﾃﾞﾙ名:
500 ThunderHex Stock (3 feet)
ｺﾝﾌｨｷﾞｭﾚｰｼｮﾝ名:
部品番号:
217-4017
数量:
ﾌｧｰｽﾄﾈｰﾑ(名):
ﾗｽﾄﾈｰﾑ(姓):
電子ﾒｰﾙ:
電話番号:
会社名:
住所:
市/区/町:
都道府県名:
国:
郵便番号:
ｺﾒﾝﾄ:
ｺﾋﾟｰを電子ﾒｰﾙで送信:
   
変更日時: 8月 12,2015  
評価: 
ﾀﾞｳﾝﾛｰﾄﾞ: 37
 
ｺﾒﾝﾄ: 
 
 

このﾓﾃﾞﾙのより優れたﾊﾞｰｼﾞｮﾝまたは修正ﾊﾞｰｼﾞｮﾝを持っていますか?
代替ﾊﾞｰｼﾞｮﾝを投稿   (ﾛｸﾞｲﾝが必要)
この 3D ﾓﾃﾞﾙをﾌﾞﾛｸﾞに埋め込む

 
不適切なｺﾝﾃﾝﾂを報告

仕様
ｻﾌﾟﾗｲﾔ ﾓﾃﾞﾙの説明: 217-4017
名前:500 ThunderHex Stock (3 feet)
説明:ThunderHex Stock & Bearings will revolutionize the ways teams use hex shaft. ThunderHex Stock works in all applications where 1/2" Hex Shaft will work and also includes rounded corners. These rounded corners allow the shaft to pilot inside a 13.75 mm round (ThunderHex) Bearing instead of a standard 1/2" Hex Bearing. This eliminates some difficult manufacturing tolerances and results in a MUCH smoother end result. Simply put, ThunderHex Bearings are the best way to create smooth-running hex shafts, and ThunderHex Stock helps you accomplish this without a lathe. Also, since you're essentially putting a round peg in a round hole, no more struggling to align the hex of your shaft with the hex hole of your bearing. All ThunderHex Stock also includes a subtle but very useful feature: a 0.201" hole through the center. This hole provides a clearance fit for a #10 bolt or can be tapped for 1/4-20 bolts. This means that you no longer need a precision lathe to create custom-length, high-strength standoffs; simply cut the ThunderHex shaft to size and tap it with a 1/4-20 (or 1/4-28) thread.
    
  • 設定とﾀﾞｳﾝﾛｰﾄﾞ
  • 評価とｺﾒﾝﾄ (0)
  • ﾀｸﾞ (0)
  • 代替ﾊﾞｰｼﾞｮﾝ

 

指定されたｻｲｽﾞ設定ﾊﾟﾗﾒｰﾀｰに従って、3D または 2D ﾌｫｰﾏｯﾄでﾓﾃﾞﾙをﾀﾞｳﾝﾛｰﾄﾞします。
(ﾛｸﾞｲﾝが必要)
  この部品を最初に評価する  (ﾛｸﾞｲﾝが必要)

不適切なｺﾒﾝﾄを報告
   


このﾓﾃﾞﾙの別のﾊﾞｰｼﾞｮﾝを持っていますか? 代替ﾊﾞｰｼﾞｮﾝを投稿 (ﾛｸﾞｲﾝが必要)
VEX Robotics
VEX Robotics
1519 Interstate 30 West
Greenville, Texas, 75402
United States
電話番号: 19034530802
Fax:
電子ﾒｰﾙ:
Web ﾍﾟｰｼﾞ: http://www.vexrobotics.co...
このｻﾌﾟﾗｲﾔのすべての製品