変更日時:
8月 11,2015
評価:
ﾀﾞｳﾝﾛｰﾄﾞ:
24
代替ﾊﾞｰｼﾞｮﾝ:
ｻﾌﾟﾗｲﾔ部品番号:
217-3648
名前: Drive in a Day 説明: Immediately following the 2014 FRC kickoff, two teams of VEXpro engineers faced off in a three day robot building whirlwind known as Build Blitz. Team JVN designed a new sheet metal base with the intent that any team would be able to benefit from the lessons learned during Build Blitz, and the 2014 Drive-in-a-Day is the result of that effort. The 2014 Drive in a Day is a configurable chassis system that produces lightweight, affordable, and robust sheet metal drivetrains. With a 0.5" pitch and a wide variety of mounting holes for motors, gearboxes, and bearings, teams can use the 2014 Drive in a Day to build the drivetrain that's right for them. Supports 4WD or 6WD (with 1/8" drop center). Optional Cross Rail can be used for a 5-wheel H-drive (note: Cross Rail requires Corner Gussets). Fits 3.25" or 4" wheels. Works with Omni, Mecanum, or Traction Wheels. Natively mounts many VEXpro gearboxes. Configurable for either live or dead axles. Mounts CIM-style motors directly to the side rails for a clean and efficient single reduction. Note: Hardware not included.
設定とﾀﾞｳﾝﾛｰﾄﾞ
評価とｺﾒﾝﾄ (0)
ﾀｸﾞ (0)
代替ﾊﾞｰｼﾞｮﾝ
以下のｵﾌﾟｼｮﾝを変更して、ﾀﾞｳﾝﾛｰﾄﾞするﾓﾃﾞﾙをｶｽﾀﾏｲｽﾞします。[ﾌﾟﾚﾋﾞｭｰ更新] ﾎﾞﾀﾝをｸﾘｯｸして、変更内容をﾋﾞｭｰｱに適用します。
ﾋﾞｭｰ:
4 ﾋﾞｭｰ
ﾏﾙﾁ ﾋﾞｭｰ
正面
上
右
戻る
下
左
等角投影
両等角投影
不等角投影
現在のｾｯｼｮﾝがﾀｲﾑｱｳﾄしました。[OK] を押してﾍﾟｰｼﾞを再度読み込み、再試行してください。
ﾀﾞｳﾝﾛｰﾄﾞ...
ﾀﾞｳﾝﾛｰﾄﾞ用にﾓﾃﾞﾙを設定しています。しばらくお待ちください。
ﾓﾃﾞﾙをﾀﾞｳﾝﾛｰﾄﾞできます。<br/>ﾘﾝｸを SOLIDWORKS へﾄﾞﾗｯｸﾞ & ﾄﾞﾛｯﾌﾟするか、ﾘﾝｸをｸﾘｯｸしてﾌｧｲﾙをﾀﾞｳﾝﾛｰﾄﾞします。
(ﾛｸﾞｲﾝが必要)
VEX Robotics
VEX Robotics 1519 Interstate 30 West Greenville , Texas , 75402 United States
このｻﾌﾟﾗｲﾔのすべての製品