MMC3630KJ-BGA8 1.2X1.2x0.5-MEMSIC

ｻﾌﾟﾗｲﾔ:
User Library
ﾓﾃﾞﾙ名:
MMC3630KJ-BGA8 1.2X1.2x0.5-MEMSIC
ｺﾝﾌｨｷﾞｭﾚｰｼｮﾝ名:
181.0707
部品番号:
MMC3630KJ
数量:
ﾌｧｰｽﾄﾈｰﾑ(名):
ﾗｽﾄﾈｰﾑ(姓):
電子ﾒｰﾙ:
電話番号:
会社名:
住所:
市/区/町:
都道府県名:
国:
郵便番号:
ｺﾒﾝﾄ:
ｺﾋﾟｰを電子ﾒｰﾙで送信:
   
変更日時: 2月 21,2019  
評価: 
ﾀﾞｳﾝﾛｰﾄﾞ: 114
 
ｺﾒﾝﾄ: 
 
 

このﾓﾃﾞﾙのより優れたﾊﾞｰｼﾞｮﾝまたは修正ﾊﾞｰｼﾞｮﾝを持っていますか?
代替ﾊﾞｰｼﾞｮﾝを投稿   (ﾛｸﾞｲﾝが必要)
この 3D ﾓﾃﾞﾙをﾌﾞﾛｸﾞに埋め込む

 
不適切なｺﾝﾃﾝﾂを報告

仕様
ｻﾌﾟﾗｲﾔ部品番号: MMC3630KJ
名前:MMC3630KJ-BGA8 1.2X1.2x0.5-MEMSIC
説明:The MMC3630KJ is a complete 3-axis magnetic sensor with on-chip signal processing and integrated I2C bus. The device can be connected directly to a microprocessor, eliminating the need for A/D converters or timing resources. It can measuremagnetic fields within the full scale range of 30 Gauss (G), with 1 mG per LSB resolution at 16 bits operation mode and 2 mG total RMS noise level, enabling heading accuracy of ±1º in electronic compass applications. Contact MEMSIC for access to advanced calibration and tilt-compensation algorithms. An integrated SET/RESET function provides for the elimination of error due to Null Field output change with temperature. In addition it clears the sensors of any residual magnetic polarization resulting from exposure to strong external magnets. The SET/RESET function can be performed for each measurement or periodically as the specific application requires. The MMC3630KJ is packaged in an ultra-small low profile BGA package (1.2x 1.2 x 0.5 mm) and with an operating temperature range from -40 °C to +85 °C. The MMC3630KJ provides an I2C digital output with 400 KHz, fast mode operation.
    
  • 設定とﾀﾞｳﾝﾛｰﾄﾞ
  • 評価とｺﾒﾝﾄ (0)
  • ﾀｸﾞ (0)
  • 代替ﾊﾞｰｼﾞｮﾝ

 

指定されたｻｲｽﾞ設定ﾊﾟﾗﾒｰﾀｰに従って、3D または 2D ﾌｫｰﾏｯﾄでﾓﾃﾞﾙをﾀﾞｳﾝﾛｰﾄﾞします。
(ﾛｸﾞｲﾝが必要)
  この部品を最初に評価する  (ﾛｸﾞｲﾝが必要)

不適切なｺﾒﾝﾄを報告
   


このﾓﾃﾞﾙの別のﾊﾞｰｼﾞｮﾝを持っていますか? 代替ﾊﾞｰｼﾞｮﾝを投稿 (ﾛｸﾞｲﾝが必要)