変更日時:
3月 29,2022
評価:
ﾀﾞｳﾝﾛｰﾄﾞ:
18
代替ﾊﾞｰｼﾞｮﾝ:
ﾓﾃﾞﾙの説明:
Bicycle_Rack_Tesla_Model_Y
名前: Bicycle Rack for Tesla Model Y 説明: This design for a car-mounted bicycle rack was created by me in 2021. The primary requirements for this design are (1) reduced drag while traveling long distances, and (2) easy mounting and removal. Although I designed it for my Tesla Model Y, it will probably work on other cars, especially if the strut that goes into the 2" receiver is lengthened. The design requires fork mount brackets to be purchased (not shown in the model) and the front wheels stored inside the car. It is also intended that one of the bike pedals be removed and one of the handlebars be rotated. These compromises allow the bikes to sit very close to the car for reduced wind drag. I offer it as a concept to be improved, modified, or fabricated as is. The features in Strut4 that relate to the removable handle might need to be adjusted to miss front chainwheels on some bikes. I don't use the handle at all since my bikes are lightweight and the handle doesn't add much functionality when mounting and dismounting the rack to the car. I do not intend to be compensated for this design, but I do expect that if anyone benefits from it, they donate generously to either Ujamaa Place (https://ujamaaplace.org/) or Honor the Earth (https://www.honorearth.org/). If those organizations no longer exist, donate to the United Nations (https://www.un.org/).
Peter Truitt
ptruitt@protonmail.com
https://muckrack.com/peter-truitt/articles
https://www.youtube.com/channel/UCP3r5IN8wSZODc8HtfaucKw
設定とﾀﾞｳﾝﾛｰﾄﾞ
評価とｺﾒﾝﾄ (0)
ﾀｸﾞ (0)
代替ﾊﾞｰｼﾞｮﾝ
以下のｵﾌﾟｼｮﾝを変更して、ﾀﾞｳﾝﾛｰﾄﾞするﾓﾃﾞﾙをｶｽﾀﾏｲｽﾞします。[ﾌﾟﾚﾋﾞｭｰ更新] ﾎﾞﾀﾝをｸﾘｯｸして、変更内容をﾋﾞｭｰｱに適用します。
ﾋﾞｭｰ:
4 ﾋﾞｭｰ
ﾏﾙﾁ ﾋﾞｭｰ
正面
上
右
戻る
下
左
等角投影
両等角投影
不等角投影
Default Off-the-shelf excluded
現在のｾｯｼｮﾝがﾀｲﾑｱｳﾄしました。[OK] を押してﾍﾟｰｼﾞを再度読み込み、再試行してください。
ﾀﾞｳﾝﾛｰﾄﾞ...
ﾀﾞｳﾝﾛｰﾄﾞ用にﾓﾃﾞﾙを設定しています。しばらくお待ちください。
ﾓﾃﾞﾙをﾀﾞｳﾝﾛｰﾄﾞできます。<br/>ﾘﾝｸを SOLIDWORKS へﾄﾞﾗｯｸﾞ & ﾄﾞﾛｯﾌﾟするか、ﾘﾝｸをｸﾘｯｸしてﾌｧｲﾙをﾀﾞｳﾝﾛｰﾄﾞします。
(ﾛｸﾞｲﾝが必要)