変更日時:
10月 11,2015
評価:
ﾀﾞｳﾝﾛｰﾄﾞ:
238
代替ﾊﾞｰｼﾞｮﾝ:
ｻﾌﾟﾗｲﾔ部品番号:
EPL-LED-150W-RT
名前: 150 Watt Explosion Proof LED Flood Light - Surface Mount - 13,000 Lumens - Class 1 Division 1 - Paint Spray Booth 説明: The Larson Electronics EPL-LED-150W-RT Explosion Proof LED Flood Light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures.
This Class 1 Division 1 & 2, Class 2 Division 1 & 2 explosion proof LED flood light fixture provides 13,000 of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.
The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered
設定とﾀﾞｳﾝﾛｰﾄﾞ
評価とｺﾒﾝﾄ (1)
ﾀｸﾞ (0)
代替ﾊﾞｰｼﾞｮﾝ
以下のｵﾌﾟｼｮﾝを変更して、ﾀﾞｳﾝﾛｰﾄﾞするﾓﾃﾞﾙをｶｽﾀﾏｲｽﾞします。[ﾌﾟﾚﾋﾞｭｰ更新] ﾎﾞﾀﾝをｸﾘｯｸして、変更内容をﾋﾞｭｰｱに適用します。
ﾋﾞｭｰ:
4 ﾋﾞｭｰ
ﾏﾙﾁ ﾋﾞｭｰ
正面
上
右
戻る
下
左
等角投影
両等角投影
不等角投影
現在のｾｯｼｮﾝがﾀｲﾑｱｳﾄしました。[OK] を押してﾍﾟｰｼﾞを再度読み込み、再試行してください。
ﾀﾞｳﾝﾛｰﾄﾞ...
ﾀﾞｳﾝﾛｰﾄﾞ用にﾓﾃﾞﾙを設定しています。しばらくお待ちください。
ﾓﾃﾞﾙをﾀﾞｳﾝﾛｰﾄﾞできます。<br/>ﾘﾝｸを SOLIDWORKS へﾄﾞﾗｯｸﾞ & ﾄﾞﾛｯﾌﾟするか、ﾘﾝｸをｸﾘｯｸしてﾌｧｲﾙをﾀﾞｳﾝﾛｰﾄﾞします。
(ﾛｸﾞｲﾝが必要)