38300L

ｻﾌﾟﾗｲﾔ:
Mitee-Bite Products Inc
ﾓﾃﾞﾙ名:
38300L
ｺﾝﾌｨｷﾞｭﾚｰｼｮﾝ名:
部品番号:
38300L
数量:
ﾌｧｰｽﾄﾈｰﾑ(名):
ﾗｽﾄﾈｰﾑ(姓):
電子ﾒｰﾙ:
電話番号:
会社名:
住所:
市/区/町:
都道府県名:
国:
郵便番号:
ｺﾒﾝﾄ:
ｺﾋﾟｰを電子ﾒｰﾙで送信:
間違った部品名="38300L" が指定されました。ｺﾝﾌｨｷﾞｭﾚｰｼｮﾝ情報を確認してから続行してください。ﾓﾃﾞﾙのｺﾝﾌｨｷﾞｭﾚｰｼｮﾝはﾃﾞﾌｫﾙﾄのｺﾝﾌｨｷﾞｭﾚｰｼｮﾝに設定されます。
   
変更日時: 3月 17,2022  
評価: 
ﾀﾞｳﾝﾛｰﾄﾞ: 10
 
ｺﾒﾝﾄ: 
 
 

このﾓﾃﾞﾙのより優れたﾊﾞｰｼﾞｮﾝまたは修正ﾊﾞｰｼﾞｮﾝを持っていますか?
代替ﾊﾞｰｼﾞｮﾝを投稿   (ﾛｸﾞｲﾝが必要)
この 3D ﾓﾃﾞﾙをﾌﾞﾛｸﾞに埋め込む

 
不適切なｺﾝﾃﾝﾂを報告

仕様
ｻﾌﾟﾗｲﾔ部品番号: 38300L
名前:38300L
説明:The ID Xpansion™ clamp is the ideal solution to hold parts on an inside diameter for high density machining on vertical or horizontal machining centers. It can also be used as an expanding mandrel on a lathe. These machinable clamps are produced in 12L14 steel with black oxide coating in 12 sizes and can hold internal diameters from under 3/16 to almost 10 inches (4.1 to 254mm). #10 manufactured using 7075-T6 aluminum. The flange diameter of the clamp is held to a close tolerance for precision locating in a machined pocket on work cubes and fixture plates. The customer machines the mild steel clamp to match the bore of the part ensuring a proper fit. Often times the clamps can be remachined for different size jobs. The low profile ID Xpansion™ Clamp can hold several parts in one compact area for secondary operations without any clamping interference. They are quickly tightened with a hex key, torque driver or can be mated to hydraulic pull cylinders for automation.
    
  • 設定とﾀﾞｳﾝﾛｰﾄﾞ
  • 評価とｺﾒﾝﾄ (0)
  • ﾀｸﾞ (0)
  • 代替ﾊﾞｰｼﾞｮﾝ

 

指定されたｻｲｽﾞ設定ﾊﾟﾗﾒｰﾀｰに従って、3D または 2D ﾌｫｰﾏｯﾄでﾓﾃﾞﾙをﾀﾞｳﾝﾛｰﾄﾞします。
(ﾛｸﾞｲﾝが必要)
  この部品を最初に評価する  (ﾛｸﾞｲﾝが必要)

不適切なｺﾒﾝﾄを報告
   


このﾓﾃﾞﾙの別のﾊﾞｰｼﾞｮﾝを持っていますか? 代替ﾊﾞｰｼﾞｮﾝを投稿 (ﾛｸﾞｲﾝが必要)
Mitee-Bite Products Inc
Mitee-Bite Products is the innovator of the strongest, lowest profile, high-density clamping solutions geared towards improving production and providing solutions for difficult workholding applications. We pride ourselves in producing a product that allows customers to improve their processes by simple means. We are here to assist with the design and development of new procedures to help reduce idle spindle time and wasted man-hours, and increase your efficiency and output.
Mitee-Bite Products Inc
340 Route 16B
P.O. BOX 430
 Center Ossipee, New Hampshire, 03814
United States
電話番号: 800-543-3580
Fax: 603-539-2183
電子ﾒｰﾙ:
Web ﾍﾟｰｼﾞ: Http://www.miteebite.com
このｻﾌﾟﾗｲﾔのすべての製品