変更日時:
5月 28,2020
評価:
ﾀﾞｳﾝﾛｰﾄﾞ:
211
代替ﾊﾞｰｼﾞｮﾝ:
ｻﾌﾟﾗｲﾔ ﾓﾃﾞﾙの説明:
851
名前: Slide-A-Mark 851Series 説明: Model 751 8-Ton These systems offer thewidest array of options for integration. The Slide-A-Mark feature
acts as a self clamping device, and allows for minimal fixturing.
Radial rod orientation becomes infinite by loosening the front
collar clamp on the rod. The models 751 and 851 are also
offered with a wide range of holders and numbering heads.
5 Standard rod styles to hold the stamps offer multicharacter
OA or OAS75, single character OB, standard
ball lock tooling mount OK, or custom press shank mount OH.
4 different approach strokes: 2 1/2", 4", 6", and 8". 10"
and 12" stroke lengths are available upon request.
Integrated position sensors offer the added benefit to
integrators. These units offer the added feature of an optional advance and return position sens
Standard marker requires lubricated air.
The NL non-lube version is required for "dry" air.
Recommended Air Hose: 3/8" I.D. minimum
Recommended Air Valve: 3/8" 4-way solenoid valve
Operating Pressure: 20 to 80psi
Max. Marking Pressure: For 751 = 16000lbs (at 80psi)
For 851 = 20000lbs (at 80 psi)
Stamp Capacity Rod Style "B" (1) Pc CM9X round insert 1/16"
to 1/4" character. Multi-character
insert available for smaller
character sizes.
Stamp Capacities Rod Style "A"
(10) Pc's 1/16 Char. CMG06
Stamp Inserts
(5) Pc's 1/8 Char. CMG13 Stamp
Inserts
Stamp Capacities Rod Style "AS75 "
(12) Pc's 1/16 Char. CMG06 Stamp Inserts
(6) Pc's 1/8 Char. CMG13 Stamp Inserts
Tooling Mount Rod Style "K"
Ball lock mount for standard tooling including holders and
numbering heads Tooling mount Rod Style "H"
Press shank to mount custom tooling
ﾃﾞｰﾀｼｰﾄ:
設定とﾀﾞｳﾝﾛｰﾄﾞ
評価とｺﾒﾝﾄ (0)
ﾀｸﾞ (0)
代替ﾊﾞｰｼﾞｮﾝ
以下のｵﾌﾟｼｮﾝを変更して、ﾀﾞｳﾝﾛｰﾄﾞするﾓﾃﾞﾙをｶｽﾀﾏｲｽﾞします。[ﾌﾟﾚﾋﾞｭｰ更新] ﾎﾞﾀﾝをｸﾘｯｸして、変更内容をﾋﾞｭｰｱに適用します。
ﾋﾞｭｰ:
4 ﾋﾞｭｰ
ﾏﾙﾁ ﾋﾞｭｰ
正面
上
右
戻る
下
左
等角投影
両等角投影
不等角投影
Rod style:
Round Insert - 1/6" to 1/4" character
Rectangular Insert - 5 of 1/8" or 10 of 1/16" character
Rectangular Insert - 6 of 1/8" or 12 of 1/16" character
KA Style Mount - 4 of 1/8", 5 of 3/32" or 8 of 1/16" characters
KA Style Mount - 6 of 1/8", 8 of 3/32" or 12 of 1/16" characters
KA Style Mount - 8 of 1/8", 10 of 3/32" or 16 of 1/16" characters
KA Style Mount - 12 of 1/8", 16 of 3/32" or 24 of 1/16" characters
KA Style Mount - 16 of 1/8", 21 of 3/32" or 32 of 1/16" characters
KA Style Mount - 20 of 1/8", 26 of 3/32" or 40 of 1/16" characters
KB Style Mount - 4 of 3/16" or4 of 5/32" characters
Stroke:
Sensors:
None
Return 24VDC Position Sensor
Advance and Return 24VDC Position Sensor
Return 110VAC Position Sensor
Advance and Return 110VAC Position Sensor
Non-Lube Option:
現在のｾｯｼｮﾝがﾀｲﾑｱｳﾄしました。[OK] を押してﾍﾟｰｼﾞを再度読み込み、再試行してください。
ﾀﾞｳﾝﾛｰﾄﾞ...
ﾀﾞｳﾝﾛｰﾄﾞ用にﾓﾃﾞﾙを設定しています。しばらくお待ちください。
ﾓﾃﾞﾙをﾀﾞｳﾝﾛｰﾄﾞできます。<br/>ﾘﾝｸを SOLIDWORKS へﾄﾞﾗｯｸﾞ & ﾄﾞﾛｯﾌﾟするか、ﾘﾝｸをｸﾘｯｸしてﾌｧｲﾙをﾀﾞｳﾝﾛｰﾄﾞします。
(ﾛｸﾞｲﾝが必要)
Columbia Marking Tools
Columbia Marking Tools manufactures tools that mark metal and plastic.
Columbia Marking Tools 27430 Luckino Drive Chesterfield Twp. , Michigan , 48047 United States
このｻﾌﾟﾗｲﾔのすべての製品