KF-16 Centering Ring, Edwards Trapped

ｻﾌﾟﾗｲﾔ:
Ideal Vacuum Products
ﾓﾃﾞﾙ名:
KF-16 Centering Ring, Edwards Trapped
ｺﾝﾌｨｷﾞｭﾚｰｼｮﾝ名:
Default
部品番号:
P103180
数量:
ﾌｧｰｽﾄﾈｰﾑ(名):
ﾗｽﾄﾈｰﾑ(姓):
電子ﾒｰﾙ:
電話番号:
会社名:
住所:
市/区/町:
都道府県名:
国:
郵便番号:
ｺﾒﾝﾄ:
ｺﾋﾟｰを電子ﾒｰﾙで送信:
   
変更日時: 2月 19,2014  
評価: 
ﾀﾞｳﾝﾛｰﾄﾞ: 39
 
ｺﾒﾝﾄ: 
 
 

このﾓﾃﾞﾙのより優れたﾊﾞｰｼﾞｮﾝまたは修正ﾊﾞｰｼﾞｮﾝを持っていますか?
代替ﾊﾞｰｼﾞｮﾝを投稿   (ﾛｸﾞｲﾝが必要)
この 3D ﾓﾃﾞﾙをﾌﾞﾛｸﾞに埋め込む

 
不適切なｺﾝﾃﾝﾂを報告

仕様
ｻﾌﾟﾗｲﾔ ﾓﾃﾞﾙの説明: P103180
名前:KF-16 Centering Ring, Edwards Trapped
説明:Fluoroelastomer ‘O’ rings, our fluoroelastomer (VIT) Viton ‘O’ rings are manufactured from a copolymer of vinylidene fluoride and hexafluoro-propylene. Fluoroelastomer ‘O’ rings should be used in systems operated below 10-6 mbar. Fluoroelastomer ‘O’ rings take up a set as their operating temperature increases, but this does not affect their sealing properties in vacuum applications. A fluoroelastomer ‘O’ ring will restore to its normal shape after uncompressed exposure to atmosphere: accelerate this process by heating to 150 °C in air. The baking temperature of fluoroelastomer need not exceed 150 °C, since a higher temperature will not, after cooling; further reduce the outgassing rate of the fluoroelastomer. Fluoroelastomer ‘O’ rings have wider tolerances than those specified in BS1806.

They offer Very low outgassing rate (especially after baking) Chemical stability at high temperatures up to 200 °C, High resistance to oils and many chemical. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel with Viton® O-Ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers. Includes SolidWorks mate reference to snap to all other Ideal Vacuum KF fittings.
    
  • 設定とﾀﾞｳﾝﾛｰﾄﾞ
  • 評価とｺﾒﾝﾄ (0)
  • ﾀｸﾞ (0)
  • 代替ﾊﾞｰｼﾞｮﾝ

 

指定されたｻｲｽﾞ設定ﾊﾟﾗﾒｰﾀｰに従って、3D または 2D ﾌｫｰﾏｯﾄでﾓﾃﾞﾙをﾀﾞｳﾝﾛｰﾄﾞします。
(ﾛｸﾞｲﾝが必要)
  この部品を最初に評価する  (ﾛｸﾞｲﾝが必要)

不適切なｺﾒﾝﾄを報告
   


このﾓﾃﾞﾙの別のﾊﾞｰｼﾞｮﾝを持っていますか? 代替ﾊﾞｰｼﾞｮﾝを投稿 (ﾛｸﾞｲﾝが必要)
Ideal Vacuum Products
We are in the business of selling vacuum pump products, vacuum fittings, vacuum pressure measurement gauges, & supplies. Our mission is to provide you with friendly and helpful service. If you need products or have questions, give us a call. A real person will answer your call and your questions. We service the products we sell; we know how they work, how they should be used, how long they will last, when service is required, and how to analyze symptoms during failure. We can and want to help!
Ideal Vacuum Products
5910 Midway Park Blvd NE
Albuquerque, New Mexico, 87109
United States
電話番号: 5058720037
Fax: 5058729001
電子ﾒｰﾙ:
Web ﾍﾟｰｼﾞ: https://www.idealvac.com
このｻﾌﾟﾗｲﾔのすべての製品