80mm OD tube to allow top filling of compartment via hose with 3" camlock whilst reducing splash and static build up. Cut to required length.

80mm OD tube with stainless steel gauze strip running entire length. It is used to contain a manual dipstick in tanker compartment. Cut to required length.

API camlock to 100mm (4") male camlock adaptor - straight

100mm balance assembly for bottom loading arms. 360° swivel in horizontal plane, outlet moves ±15° above and below horizontal. Gas struts support weight of arm for easy manoeuvrability. 4" ANSI 150 RF inlet flange, 4" TTMA outlet.

Tanker top manhole, Ø450mm clampband mounted with Ø230mm quick-opening hatch which doubles as emergency vent with pressure/vacuum relieving vent and rollover protection. Cover has three equipment and one probe mounting holes. Complies to AS2809.

Hosereel assemblies in 3 widths (12, 18 & 24") with manual or hydraulic rewind option. Rated 2100 kPa. Supplied without hose, nozzle, gooseneck or hydraulic rewind motor.

The sensor monitors the level of product in a tank. It sends this information back to the CPU DIP200 where it is shown as an actual level or converted to a volume reading. The Diptronic system eliminates the need for manual dipsticks. This means there is no longer a need for personnel to climb to the top of the tank, eliminating associated injury risk. Also, the escape of VOC’s is prevented, as dip hatches do not require opening.

Overfill protection monitor for loading using electro-optic sensors, fibre-optic sensors, or both. Also used as earth assurance monitor.

Tanker top manhole, Ø450mm bolt-on mounting with Ø230mm quick-opening hatch which doubles as emergency vent with pressure/vacuum relieving vent and rollover protection. Cover has two equipment and one probe mounting holes. Complies to AS2809.

LTA brass adaptors provide the tank side connection for the LTE series elbows. Screwed into place on the storage tank inlet, the LTA adaptors come in a variety of size combinations.