REV Robotics

モデルの場所:REV Robotics CatalogMotion
結果 41 ~ 50/120
ページごとの結果:
部品番号
サプライヤ
説明
The 5mm Hex to 8mm Round Bearing Insert, when paired with the 8mm x 12mm x 3.5mm Flanged Bearing (REV-49-1559), allows you to support 5mm hex shaft with a robust low friction bearing. It includes a pair of locking tabs that secure the insert to the bearing.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
30
追加日
29 6, 2020
部品番号
サプライヤ
説明
This bearing pillow block bracket is used with the REV 15mm Extrusion System. The hex center hole fits REV Robotics 5mm hex shaft.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
82
追加日
24 12, 2019
部品番号
サプライヤ
説明
This bearing pillow block bracket is used with the REV 15mm Extrusion System. The 9mm center hole is use with either the REV Robotics Long Through-bore Bearing (REV-41-1329) or the End Cap Bearing (REV-41-1322) to provide a low friction shaft support.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
111
追加日
24 12, 2019
部品番号
サプライヤ
説明
The long through-bore bearings are used with the 5mm hex shaft recommend for the REV 15mm Extrusion System to provide a low friction rotating shaft support.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
96
追加日
24 12, 2019
部品番号
サプライヤ
説明
The short through-bore bearings are used with the 5mm hex shaft recommend for the REV 15mm Extrusion System to provide a low friction rotating shaft support.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
84
追加日
24 12, 2019
部品番号
サプライヤ
説明
The REV End Cap Bearing is used with the 5mm hex shaft recommended for the REV 15mm Extrusion System to provide a low friction rotating shaft support.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
30
追加日
24 12, 2019
部品番号
サプライヤ
説明
Omni wheels have rollers mounted around the outside which passively rotate at 90 degrees to the powered direction of the wheel. Omni wheels can be used to make is easier to turn with skid steer robots or can be used to make more advanced robot drive trains like kiwi drive.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
211
追加日
24 12, 2019
部品番号
サプライヤ
説明
Omni wheels have rollers mounted around the outside which passively rotate at 90 degrees to the powered direction of the wheel. Omni wheels can be used to make is easier to turn with skid steer robots or can be used to make more advanced robot drive trains like kiwi drive.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
167
追加日
24 12, 2019
部品番号
サプライヤ
説明
REV Grip Wheels are wider than our standard wheels, giving teams more traction while still being lightweight and robust. This wheel is compatible with 5mm hex shaft, which completely eliminates the need for expensive hubs or using potentially unreliable set screws.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
139
追加日
24 12, 2019
部品番号
サプライヤ
説明
The REV Robotics 90mm Traction Wheel which fits on a 5mm hex shaft is primarily intended for use with the REV 15mm Extrusion System.
カテゴリ
コンフィギュレーション
いいえ
ダウンロード
87
追加日
24 12, 2019

情報

Robotics parts supplier dedicated to helping promote STEAM globally. Proud supplier of FIRST Global, FIRST Tech Challenge, and FIRST Robotics Competition.

連絡先詳細

住所(市/区/町):
1621 W Crosby Rd
Suite 104
Carrollton, 75006
Texas, United States
電話番号: 8442552267
電子メール:
Web サイト: www.revrobotics.com