SolidComponents^TM

The Compact Cam is a well guided unit, suitable for normal piercing operations with or without a small amount of side loading.
It consists of a piston with a piston rod, guide, sleeve, front housing, rear housing, bleed nipple, gas spring, anti rotation rods and a punch adapter plate for the punch holder.
The Cam return force is provided by one or two internally installed gas springs. The punch adapter plate is prevented from rota

SolidComponents^TM

The Compact Cam is a well guided unit, suitable for normal piercing operations with or without a small amount of side loading.
It consists of a piston with a piston rod, guide, sleeve, front housing, rear housing, bleed nipple, gas spring, anti rotation rods and a punch adapter plate for the punch holder.
The Cam return force is provided by one or two internally installed gas springs. The punch adapter plate is prevented from rota

SolidComponents^TM

Where there are space restrictions within the tool, then the Power Unit is also available with separated Power Cylinder and Accumulator.

Both HCP and HCP-S Power Units can be mounted at any angle and orientation which best fits the tool.

SolidComponents^TM

The Power Unit consists of an Accumulator, Power Cylinder and a base plate.
The purpose of the Accumulator is to set the force of the Cam and to prevent over
pressurisation of the system. It will also contain some oil once the Cam has reached
its stop position.
When the piston of the Power Cylinder is struck by the press (or machine) the Cam
Units will then be actuated.
The size of the Power Unit is calculated from

SolidComponents^TM

SolidComponents^TM

CCF 040-049 and CCF-H 040-049
CCF 040-099 and CCF-H 040-099

SolidComponents^TM

The Flange Cam is suitable for flanging and other operations with large amounts of side load.
No extra guides are required as the front adapter plate is equipped with two roller bearings.
A Compact Cam Unit is used as the driver and a bottom plate provides support for the front adapter plate.
The Power Unit will actuate the Flange Cam and the return movement is provided by two internally installed gas springs.
The front ad

SolidComponents^TM

The Flange Cam is suitable for flanging and other operations with large amounts of side load.
No extra guides are required as the front adapter plate is equipped with two roller bearings.
A Compact Cam Unit is used as the driver and a bottom plate provides support for the front adapter plate.
The Power Unit will actuate the Flange Cam and the return movement is provided by two internally installed gas springs.
The front ada

SolidComponents^TM

The Compact Cam is a well guided unit, suitable for normal piercing operations with or without a small amount of side loading.
It consists of a piston with a piston rod, guide, sleeve, front housing, rear housing, bleed nipple, gas spring, anti rotation rods and a punch adapter plate for the punch holder.
The Cam return force is provided by one or two internally installed gas springs. The punch adapter plate is prevented from rota

SolidComponents^TM