SolidComponents^TM

The Multi-coupling Block 3015044 is manufactured in steel and contains fourteen G1/8” connection ports.
On delivery, all ports are fitted with sealing plugs.
Valve Adapter 3015303-01 is available as an accessory and can be fitted to one of the G1/8” connection ports. The adapter contains the same G1/8” valve port as found on standard gas springs.
The Multi-coupling Block can then be used as a charging block to enable gas charg

SolidComponents^TM

This is a small and compact block for linking hoses.
The block contains four G 1/8” connection ports.
On delivery one of the ports is fitted with a sealing plug, while the other ports are fitted with plastic protective covers only.

SolidComponents^TM

SolidComponents^TM

The 2014422-XX and 2014839-XX Section Control Blocks are manufactured in aluminium and allow separate Hose Systems to be connected to each block section.
Having separate Hose Systems within the tool allows the operator to set gas ressures in each Hose System independently.
Each block section is fitted with a manometer (0-400 bar/5800 psi), Charging Valve for gas charging, Discharge Valve for gas evacuation and seat for Pressure Re

SolidComponents^TM

SolidComponents^TM

The 4017241 Control Block is a compact aluminium
block with protective steel cover that complies with the
Ford and GM die standards.
This block is intended for continuous monitoring of gas
pressure in the Hose System.
It is fitted with manometer (0-345 bar/5000 psi), Quick
Release Coupling for gas charging, Discharge Valve for
gas evacuation and Rupture Screw for over pressure
protection.
The block cont

SolidComponents^TM

The 3116114 Control Block is a very compact aluminium block with protective stainless steel cover This block is intended for continuous monitoring of gas pressure in the Hose System.It is fitted with manometer (0-400 bar/5800 psi), Quick Release Coupling for gas charging and Discharge Valve for gas evacuation.The block contains three G1/4” connection ports, one of which can be used to connect a Pressure Relief Safety Screw.

SolidComponents^TM

The 3014206 Charging Block comes with two G1/4”
connection ports and a G1/8” charge port, identical
to that found on standard gas springs.
The G1/8” charge port allows gas charging of
the Hose System using the gas spring charging
armature.
One of the G1/4” connection ports can also be
used to connect a Pressure Relief Safety Screw.

SolidComponents^TM